When The Power Goes Out - Oki MB491 User Manual

Other Issues

When the Power Goes Out

Machine Behavior
When the power goes out, the machine behaves in the following way:
Machine's Status
During a call
During transmitting a fax The communication stops.
Receiving a fax
Copying or printing a list The printing process stops in the middle of the operation.
Idle
Note
We do not warrant operation when an uninterruptible power system (UPS) or inverter is used.
Stored Fax Data
Backing Up Data in Memory
Even if the power goes out or you turn off the machine, the data for fax transmissions and received
faxes is retained in memory.
Erased Report
The machine automatically prints out an erased report if the fax data in the memory is lost. The report
shows what data is lost by listing the following information:
F Code Box Document
Documents Received at Alternate Recipients
The deletion notification will inform you of the next item after the deleted data.
Document type
F-code box number
F-code box name
Destination name
F-code Confidential communication/F-code bulletin board communication
Time communication started
Received number of pages
Memo
The communication type is printed when it was manual reception, F-code polling, F-code secure reception or F-code bulletin
board reception.
You can continue talking.
When the electricity supply is restored,
The machine automatically starts transmitting the fax whose transmission stopped
and the subsequent data if it was a memory transmission.
The machine does not transmit the data if it was a real time transmission. Set the
document and specify the destination again to start transmission.
The transmission stops in the middle of the operation.
When the electricity supply is restored, the machine automatically prints out the data
successfully received and stored in memory.
When the power is restored, start the job again.
You cannot start another copy, fax, scan, or print job.
You also cannot receive another fax.
Behavior
- 160 -