Configuring Print Settings - Oki MB491 User Manual

Remove the USB memory from the port
11
after a message is displayed indicating
that it is OK to remove the USB memory.

Configuring Print Settings

You can configure the settings for printing from
USB memory on the [Print Setup] menu.
Perform the following procedure at step 9 of
"Printing From USB Memory" on P. 116
"Starting a Print Job".
Changing the Paper Type (Paper
Feed)
You can select the paper source.
Note
When printing a PRN file, the setting of the paper tray
follows the driver settings at the time of file creation.
Press the to select [Print Setup] and
1
then press .
OK
Check that [Paper Feed] is selected and
2
then press .
OK
Press the to select the desired value
3
and then press
OK
Selectable Paper Tray Values:
Tray 1* Tray 2
*indicates the factory default.
Press the to return to the start screen.
4
Memo
[Tray 2] is displayed only when the second tray unit is
installed as an option.
Changing the Number of Copies
(Copies)
You can set the number of copies to print.
Press the to select [Print Setup] and
1
then press .
OK
Press the to select [Copies] and then
2
press .
OK
Enter a number of copies and then press
3
You can enter 1 to 999.
Press the to return to the start screen.
4
in
.
MP Tray
Doing Duplex Printing (Duplex)
You can make 1-sided (simplex) or 2-sided
(duplex) printouts.
Note
When printing a PRN file, setting of double-sided printing
follows the driver settings at the time of file creation.
Press the
1
then press
Press the
2
press .
OK
Press the
3
printing or [OFF] for simplex printing
and then press
Press the
4
Setting the Binding Position (Binding)
You can select the binding position of duplex
printouts.
Press the
1
then press
Press the
2
then press
Press the
3
to bind at the long edge of the paper or
[Short edge bind] to bind at the short
edge of the paper and then press
Press the
4
Reference
For details on long edge binding and short edge binding,
refer to "Making Duplex Copies (Duplex Copy)" on P.
Fitting Pages (Fit)
You can match the page size to the paper size
when printing.
If the page size of a file to print is larger or
smaller than the effective print area, the page
size is resized to fit the paper size.
.
OK
Note
When printing a PRN file, these settings do not work.
Memo
This function is set to [ON] by default.
Press the
1
then press
- 117 -
Printing From USB Memory
to select [Print Setup] and
.
OK
to select [Duplex] and then
to select [ON] for duplex
.
OK
to return to the start screen.
to select [Print Setup] and
.
OK
to select [Binding] and
.
OK
to select [Long edge bind]
to return to the start screen.
to select [Print Setup] and
.
OK
5
.
OK
77.