Copying; Basic Operation; Starting A Copy Job; Canceling A Copy Job In Progress - Oki MB491 User Manual

2. Copying

This chapter explains the basic operation and settings for your machine's copy function.

Basic Operation

This section explains how to start and cancel copy job.

Starting a Copy Job

Press the <COPY> key on the operator
1
panel to open the copy standby screen.
Place your document with text face up in
2
the ADF or face down on the document
glass.
Configure the copy settings if necessary.
3
Enter the number of copies using the
4
ten-key pad.
- You can enter up 1 to 99 sets.
- If you have entered an incorrect value, press the
<CLEAR> key and then enter the correct value.
Press to start copying.
5
M
ONO
Reference
For details on how to configure each copy setting, refer to
"Configuring Copy Settings" P.
For details on how to load your documents in the ADF or on
the document glass, refer to
74.
"Loading Documents" P. 38.
Canceling a Copy Job in
Progress
You can cancel copying until the message
showing the copy completion is displayed.
Press the <STOP> key on the operator
1
panel.
Note
When you take a copy with the document glass, do not
apply an excessive load to the document glass.
- 73 -
2