Configuring Windows To Print To The Network Printer; Windows 98/Me; Windows Nt 4.0 - Oki C3300n Network Manual

C
ONFIGURING
Once you have configured the Network Card Setup utility you
must configure Windows to print to the network printer.
W 98/M
INDOWS
When printing using TCP/IP the Oki LPR utility use the following
procedure:
1. When installing the driver, ensure it is installed as a local
printer and not a network printer.
2. Ensure the appropriate printer driver has been installed in
Windows.
3. Install the Oki LPR utility as described on
manual and add the printer installed earlier.
W NT 4.0
INDOWS
NOTE
NT 4.0 requires administrator privileges.
With Windows NT 4.0, you have two options for printing using
TCP/IP. They are:
> Oki LPR
> Microsoft LPR
In order to use Microsoft LPR, it must first be installed into your
operating system.
Oki LPR
To install this port, the following needs to be carried out.
1. Select Start -> Control Panel -> Add Printer -> My
Computer.
2. Click Next.
3. Select Add Port.
4. Select LPR Port and click OK.
W
INDOWS TO PRINT TO THE NETWORK PRINTER
E
Windows> 22
page 22 of this