Removing A Hard Disk - Lexmark W810n - Optra B/W Laser Printer Reference
User's reference (3.7 mb)
Hide thumbs
Also See for W810n - Optra B/W Laser Printer:
- Reference (236 pages) ,
- Setup manual (198 pages)
Table of Contents
Advertisement
Removing a hard disk
W
:
ARNING
1
Locate the metal bracket that houses the disk.
2
Carefully pull the ribbon cable out of the system board
connector.
3
Remove the two screws that secure the hard disk to the
metal bracket.
The hard disk is easily damaged by static electricity.
Touch something metal on the printer before you
touch the disk.
Metal bracket
201
Advertisement
Table of Contents
