Removing A Printer Hard Disk - Lexmark X746 User Manual

Additional printer setup

Removing a printer hard disk

Warning—Potential Damage: System board electronic components are easily damaged by static electricity. Touch
something metal on the printer before touching any system board electronic components or connectors.
1
Access the system board.
For more information, see "Accessing the system board" on page 26.
Note: This task requires a flathead screwdriver.
2
Unplug the printer hard disk interface cable from the system board, leaving the cable attached to the printer hard
disk. To unplug the cable, squeeze the paddle at the plug of the interface cable to disengage the latch before pulling
the cable out.
3
Remove the screws that connect the printer hard disk to the system board cage.
41