Determining The Status Of Supplies - Lexmark W810n - Optra B/W Laser Printer Reference

Determining the status of supplies

The printer uses the second line of the operator panel display to alert you
to any supply or maintenance items that need replacing. (These mes-
sages are discussed in more detail in the sections in this chapter devoted
to each of the consumables.) However, the printer can only display infor-
mation about one item at a time. Therefore, the display cannot indicate
when more than one item needs replacing.
If you want to determine the status of all of the consumables installed in
your printer, you can print the menu settings page from the Utilities Menu.
(Press until you see Utilities Menu. Press
Menu>
you see Print Menus. Press
able Status" on the printed page. You will then see the percentage of life
remaining for each of the items.
NOTE: If you have a MarkNet external or internal print server
(also called an INA) attached to your printer, you can view
the menu settings page from your workstation. From your
browser, type the printer's IP address in the Address box
and press Enter. This takes you to a Web page where you
can view printer status and job statistics. This may be
convenient if the printer menus are disabled.
to print the page.) Look for "Consum-
Select
Consumable Status
PC Cartridge 33%
Fuser 66%
Transfer Roller 66%
Hole Punch Box 10%
Staple Cartridge Empty
Toner Cartridge OK
108
. Press
Select Menu>
% remaining
until