Removing A Printer Hard Disk - Lexmark MX610 User Manual

Additional printer setup
d
Tighten the two screws.
4
Close the controller board shield, and then close the controller board access door.
Note: When the printer software and any hardware options are installed, you may need to manually add the
options in the printer driver to make them available for print jobs. For more information, see "Updating
available options in the printer driver" on page 49.

Removing a printer hard disk

Warning—Potential Damage: Controller board electronic components are easily damaged by static electricity.
Touch something metal on the printer before touching any controller board electronic components or connectors.
1
Access the controller board.
For more information, see "Accessing the controller board" on page 30.
Note: This task requires a flathead screwdriver.
2
Loosen the screws that connect the printer hard disk to the controller board bracket.
44