Mailbox Problems - Lexmark W810n - Optra B/W Laser Printer Reference

Mailbox problems

Use the following table to find solutions to problems you are experiencing
with the mailbox option.
Mailbox problems
Symptom Cause
Paper The mailbox and
frequently jams the printer are
in the mailbox. misaligned.
The mailbox cables
are not connected
properly.
The transport unit is
not correctly
installed.
You cannot The transport unit is
clear the not properly
installed.
280 Paper Jam /
Open Cover H
message.
The transport The guide rail
unit falls from attaching the
the top of the mailbox to the
printer when printer is not
you pull away properly installed.
the mailbox.
Solution
Align the mailbox with the printer.
See "Aligning the mailbox option" on
page 177.
Check the cable connections. Refer to
the Setup Guide for instructions on
connecting the mailbox to the printer.
If the
280 Paper Jam / Open Cover H
message recurs, verify that you have
properly installed the transport unit on
top of the printer. The gears must be
completely engaged for paper to travel
successfully from the printer to the
mailbox.
Refer to the Setup Guide for detailed
installation instructions.
Verify that you have properly installed
the transport unit on top of the printer.
Refer to the Setup Guide for detailed
installation instructions.
Reinstall the guide rail. When properly
installed, the guide rail prevents you
from pulling the mailbox too far away
from the printer.
Refer to the Setup Guide for detailed
installation instructions.
38