Resetting The Printer's Internal Counter - Lexmark W810n - Optra B/W Laser Printer Reference

Resetting the printer's internal counter

After you replace the fuser, reset the printer's internal counter to clear the
message from the operator panel display. Resetting the
Replace Fuser
counter helps prevent service calls by ensuring that the printer can alert
you when it is again time to replace the fuser. The reset process only
takes a few minutes.
1
Plug in the printer power cord.
2
Press and hold the
panel while you turn the printer on.
When
CONFIG MENU
release the buttons.
line.
3
Press
Select
4
Press
Menu>
5
Press
Select
Resetting Fuser Count
replaced by
on the second line.
6
Press
<Menu
7
Press
Select
The printer displays
transfer counter. When
is ready to receive print jobs.
and
Select
appears on the first line of the display,
MAINT COUNTERS
.
until you see
Reset Fuser
.
appears briefly on the display, and then is
on the first line and
CONFIG MENU
to display
Exit Config Menu
to return to the
Ready
Activating Menu Changes
appears on the display, the printer
Ready
147
buttons on the operator
Return
appears on the second
.
MAINT COUNTERS
.
display.
and resets the