Chapter 5: Replacing Supplies - Lexmark W810n - Optra B/W Laser Printer Reference

5
Replacing supplies
Periodically you must replace various printer supplies and maintenance
items, such as the toner cartridge, photoconductor kit, transfer kit, and
fuser. Regularly replacing these consumables prevents paper feeding and
print quality problems. Messages appear on the operator panel display to
alert you it's time to replace an item. To avoid printer downtime, you may
want to keep a supply of these consumables on hand.
Use the following table as a guide for ordering information. Turn to the
page listed in the last column for detailed information about replacing a
particular item. Installation instructions are also shipped in the box with
each consumable.
Printer supplies and maintenance items
Item
Toner cartridge
Photoconductor kit
– Photoconductor
cartridge
– Paper dust
remover
Transfer kit
– Transfer roller
– Ozone filter
Fuser
– 120V printer
– 220V printer
Staples
(for the optional
finisher)
1
For more information about the calculation of average yield, refer to the
Complete Printer Reference on Lexmark's Web site (www.lexmark.com).
2
In other countries, contact your Lexmark representative.
Average Order
1
yield number
20,000 12L0250
pages
(at approxi-
mately 5%
coverage)
90,000 12L0251
pages
(letter size,
single-
sided
pages)
150,000 12G3422
pages
150,000
pages
12G3421
12G3420
5,000 12L0252
staples per
(3 cartridges)
cartridge
107
In the U.S., For details,
2
call ... see page ...
1-800- 111
438-2468
1-800- 116
438-2468
1-800- 130
553-9727
1-800- 140
553-9727
1-800- 148
438-2468