Removing The Duplex Option; Detaching The Duplex Unit - Lexmark W810n - Optra B/W Laser Printer Reference

Removing the duplex option

The duplex option consists of two components: the duplex unit (which you
must remove first) and the manual feed unit .
Some steps in this section instruct you to attach covers and screws that
were removed during initial installation of the duplex option. If possible,
locate these covers and screws before continuing. If you purchased the
Optra W810dn model with the duplex hardware already installed, these
covers will not be available.
NOTE: This procedure requires a long Phillips screwdriver.

Detaching the duplex unit

1
Turn the printer off and unplug the power cord.
2
Remove the connector cover on the right rear corner of the
printer.
203