Requesting Audible Alarms; Storing Supplies - Lexmark W810n - Optra B/W Laser Printer Reference

Requesting audible alarms

You can choose to have the printer sound an audible alarm when it deter-
mines a consumable needs to be replaced. The printer then stops pro-
cessing jobs and waits until someone presses
before it continues printing. Setting Toner Alarm or Staple Alarm to Single
or Continuous ensures that someone in the printer workgroup is aware
that a consumable needs to be replaced, but it can also delay the printing
of jobs in a network environment.
Refer to the Complete Printer Reference on Lexmark's Web site
(www.lexmark.com) for more information about changing the alarm set-
tings from the Setup Menu.
NOTE: If
Replace Toner To Continue
appears on the display, you cannot clear the display by
pressing
printer ceases operation until the item listed in the
message is replaced.

Storing supplies

Choose a cool, clean storage area for your printer supplies. Store sup-
plies right side up in their original packaging until you are ready to install
them.
Do not expose printer supplies to:
•
Direct sunlight
•
Temperatures above 35°C (95°F)
•
High humidity (above 80%)
•
Salty air
•
Corrosive gases
•
Heavy dust
. To protect your printer from damage, the
Go
109
from the operator panel
Go
or
Replace PC Kit To Continue