Resetting The Printer's Internal Counter - Lexmark W810n - Optra B/W Laser Printer Reference

Resetting the printer's internal counter

After you replace the items in the transfer kit, reset the printer's internal
counter to clear the
display. Resetting the counter helps prevent service calls by ensuring that
the printer can alert you when it is again time to replace the transfer kit.
The reset process only takes a few minutes.
W :
ARNING
1
Turn the printer off.
2
Press and hold the
panel while you turn the printer on.
When
CONFIG MENU
release the buttons.
line.
3
Press
Select
4
Press
Menu>
5
Press
Select
Resetting Transfer Count
is replaced by
MAINT COUNTERS
6
Press
<Menu
7
Press
Select
The printer displays
transfer counter. When
is ready to receive print jobs.
message from the operator panel
Replace Transfer
Before you begin this procedure, make sure the
printer is not busy processing a print job. Turning the
printer off deletes all held jobs stored in printer
memory. Open the Job Menu to review the held jobs
before continuing.
and
Select
appears on the first line of the display,
MAINT COUNTERS
.
until you see
Reset Transfer
.
appears briefly on the display, and then
on the first line and
CONFIG MENU
on the second line.
to display
Exit Config Menu
to return to the
Ready
Activating Menu Changes
appears on the display, the printer
Ready
139
buttons on the operator
Return
appears on the second
.
.
display.
and resets the