Recognizing When Format Errors Occur; Repeat Print - Lexmark W810n - Optra B/W Laser Printer Reference

–
If you are prompted to enter the number of copies you want to
print, use the
decrease the number on the display, and press
6
Press to print or delete specific jobs you have marked.
Go
The printer briefly displays messages indicating what print and
hold functions it is performing, and then returns to the
play.

Recognizing when format errors occur

If the symbol appears on the operator panel display, it indicates that the
printer had trouble formatting one or more of the held jobs. These format-
ting problems are most commonly the result of insufficient printer memory
or invalid data that might cause the printer to flush the job.
When a symbol appears next to a held job, you can:
•
Print the job. Be aware, however, that only part of the job may
print.
•
Delete the job. You may want to free up additional printer memory
by scrolling through the list of held jobs and deleting others you
have sent to the printer.
If formatting errors are a recurring problem with held jobs, refer to the
Complete Printer Reference for information about managing printer mem-
ory.

Repeat Print

If you send a Repeat Print job, the printer prints all requested copies of
the job and stores the job in memory so you can print additional copies
later. You can print additional copies as long as the job remains stored in
memory.
NOTE: Repeat Print jobs are automatically deleted from printer
memory when the printer requires extra memory to
process additional jobs.
and
Menu> <Menu
217
buttons to increase or
Select
Ready
.
dis-