Phase 2 - Configure The Server - HP Tc2120 - Server - 256 MB RAM Installation Manual

The installation program now displays a graphical interface. You can proceed
through the customization of your installation. If you selected to install to a Promise
FastTrak100 TX2 card, the installer will ask you for your driver diskette. The
Promise FastTrak100 TX2 driver can be found on the tc2120 Startup CD.
Phase 2 – Configure the Server
Welcome to Red Hat Linux
Click on Next to continue.
NOTE: Using the GUI installation, you will have an on-screen description of each possible
selection displayed on the left of the screen.
Language Selection
Default is English. Click Next to continue.
Keyboard Selection
Please note the following recommendations:
Your HP server comes with a Generic 104-key PC keyboard and a 2 Button Mouse
(PS/2).
NOTE: If you wish to change your keyboard type after you have booted your Red Hat Linux
system, you may use the
Mouse Configuration
See note above. Click Next to continue.
Install Options
HP recommends selecting a Custom System installation type, because this mode
includes the X Window graphical interface. ("Install Options" section)
80
/usr/sbin/kbdconfig command.