Installing Red Hat Linux 8.0; Prepare The Installation; High Level Process Flow; Section 1. Perform Red Hat Linux Installation - HP Tc2120 - Server - 256 MB RAM Installation Manual

Network operating system installation guide

Hide thumbs Also See for Tc2120 - Server - 256 MB RAM:

Table of Contents

•

Red Hat World Wide Web access:

Installing Red Hat Linux 8.0

Please refer to the Chapter 1 "Preparing the HP Server tc2120 for NOS Installation"

for our recommendations on server preparation. Then gather your Red Hat Linux 8.0

Installation CD-ROMs.

1. Perform Linux 8.0 installation.

2. Learn about special cases.

1. Insert the Red Hat 8.0 Installation CD into the CD-ROM drive. Make sure that

the CD-ROM precedes any hard disks attached to the system in the boot order.

2. Boot the system from the Red Hat 8.0 Installation CD.

3. When you see the "boot: " prompt, hit enter.

NOTE: If using a Promise FastTrak TX2, please see section 2.1.

4. If it has detected your correct SCSI controller, you should see a "Loading SCSI

Driver" window come up, with the name of the SCSI controller in your system.

5. Next, you should see the "Welcome to Red Hat Linux" screen. Click Next.

1. At the "Language Selection" screen, select English with the arrow keys and click

Next.

http://www.redhat.com

Table of Contents