HP Tc2120 - Server - 256 MB RAM Installation Manual page 53

NOTE: Do not remove the IDEATA driver, because it is used by the CD-ROM drive.
d. Insert HP driver diskette (created with the Startup CD) in the floppy drive for
the appropriate controller you choose to use.
IMPORTANT: If you have a 29160 and a Promise FastTrak in the system, you must load
the Promise driver first. Then, load the driver for the 29160.
e. Press Insert to add a driver and then Insert again to add an unlisted driver.
f.
Press F3 and specify the path: A: then press Enter.
g. The installation program scans the floppy drive and automatically adds the
HP SCSI driver to the driver list.
h. If you have more controllers to install drivers for, repeat substeps e
through g.
i.
Scroll down and select "Return to driver summary."
j.
Scroll down and select Continue.
3. The next "Driver names" summary screen displays storage and network
devices.
a. Scroll down to choose Modify and press Enter.
b. Scroll down to highlight the "Network boards" item and press Enter.
c. The installation program displays the drivers detected. You can press Delete
to remove the default network driver, if present.
d. Insert the HP driver diskette (created with the Startup CD) in the floppy drive
for the appropriate card you choose to use.
e. Press Insert to add a driver, and then Insert again to add an unlisted driver.
f.
Press F3 and specify the path: A: then press Enter.
g. The installation program scansthe floppy drive and then automatically adds
the HP driver to the driver list.
h. Scroll down and select "Return to driver summary."
i.
Scroll down and select Continue.
53