Installing Red Hat Linux 7.1; Prepare The Installation; High Level Process Flow; Perform Red Hat Linux Installation - HP Tc2110 - Server - 128 MB RAM Installation Manual

Network operating system

Hide thumbs Also See for Tc2110 - Server - 128 MB RAM:

Table of Contents

7 Installing Red Hat Linux 7.1

Please refer to the Chapter 1 "Preparing your HP Server tc2110 for your NOS

installation" for our recommendations on the server preparation.

Then gather the following material:

· HP Server tc2110 Startup CD

· Red Hat Linux 7.1 CD-ROMs #1 and #2

· Two or more clients for testing purpose (Optional)

1. Perform Linux 7.1 installation.

2. Install additional HP accessories.

Section 1. Perform Red Hat Linux Installation

PHASE 1 – Launch the Installation

1. Turn on the server and insert the Red Hat Linux 7.1 bootable CD-ROM.

2. The system will display a text menu. Press Enter to start installation using the

graphical interface.

PHASE 2 – Configure the Server

The installation program now displays a graphical interface. You can proceed

through the customization of your installation.

Please note the following recommendations:

· Your HP server comes with a Generic 104-key PC keyboard and a 2 Button

Mouse (PS/2).

NOTE

If you wish to change your keyboard type after you have

booted your Red Hat Linux system, you may use the

"/usr/sbin/kbdconfig" command.

Table of Contents