HP Tc2120 - Server - 256 MB RAM Installation Manual page 89

b. Select Primary partition.
c. Set the parameters for the boot partition as follows:
Format (file system): ext2
Size: Start: Default
End: Default
Mount point: /
6. Click Next to proceed.
Software Selection
Default with Office is the default selection. HP recommends selecting the
Default system during the Software Selection. However, depending upon the
role the HP tc2120 Server will serve in your network environment, additional
packages may be necessary. Additional software from the other SuSE Linux 7.3 CDs
can always be installed after the initial installation. Review and modify as necessary.
NOTE: Remember to select appropriate package groups that matches your network settings
(example: the "DNS Name Server" package may be required if you have set up your new
server to be the DNS controller).
System Boot Configuration
SuSE Linux uses LILO as its boot manager. Review and modify as necessary. Click
Next to continue.
Password for "root"
Input a password for "root" access. Because the root user has extensive permissions,
the password for "root" should be chosen carefully.
Personalize
Input as necessary. Click Next to continue.
89