Phase 2 - Attach Clients To Network And Test Network Link - HP Tc2120 - Server - 256 MB RAM Installation Manual

1. Right click My Network Places | Properties | Local Area Connection on your
HP server.
NOTE: If your HP server hosts several network adapters, the window will show one
"Local Area Connection" icon for each Network adapter present in the system. Identify the
proper adapter by browsing each one.
2. Click Internet Protocol (TCP/IP) | Properties | Use the following IP address.
3. Enter appropriate IP address.
4. Click the OK to continue, and then OK again to exit the "Local Area Connection
Properties" window. Click Yes to restart your computer and take these settings
into account.
Phase 2 – Attach Clients to Network and Test Network Link
1. Create shares: create a folder on your HP server hard drive then share it (right
click Sharing).
2. Create users using Windows 2000 Computer Management utility: Start |
Programs | Administrative Tools | Computer Management | System tools |
Local Users and Groups | Users.
3. Connect clients PC to the network your HP server operates on.
4. Open a command prompt window to verify the TCP/IP configuration and enter
the command:
ipconfig /all
5. To verify the server and clients can communicate properly:
18