HP Tc2120 - Server - 256 MB RAM Installation Manual page 83

Boot Diskette Creation
NOTE: HP recommends that you create a boot diskette that will allow you to boot and
manage your server should you experience problems in loading your Red Hat environment.
Monitor Selection
The installation program will attempt to detect the monitor being used; otherwise you
can find HP monitor references on the back of your monitor.
Custom X Configuration
HP recommends selecting login type as "Graphical" ("Custom
Configuration" section). Click Next to continue.
CAUTION: If installing to a Promise FastTrak100 TX2, these additional steps are
required. Failure to follow these steps may result in the user unable to successfully
boot to the Red Hat Linux 7.3 environment.
If installing to the Promise FastTrak100 TX2:
1. At the congratulations screen, after installation, press Ctrl-Alt-F2.
2. Enter the command: chroot /mnt/sysimage
If using a Linux editor such vi, edit: /etc/lilo.conf, add the following:
Disk=/dev/sdX
(Where /dev/sdX is the location of your Promise boot drive)
83