HP Tc2120 - Server - 256 MB RAM Installation Manual page 63

c.
The installation program displays the drivers detected: a SCSI driver and a
generic ATA/IDE/ATAPI Adapter driver (IDEATA.HAM). Press Delete to
remove the default SCSI driver. The only remaining driver should be the
IDEATA.HAM driver.
NOTE: Do NOT remove the IDEATA driver because it is used by the CD-ROM Drive.
d. Insert HP disk NW SCSI (created with the Startup CD) in the floppy drive.
e.
Press Insert to add a driver and then Insert again to add an unlisted driver.
f.
Press F3 and specify the path: A: then press Enter.
g.
The installation program takes a few seconds then automatically adds the HP
driver on the driver list.
NOTE: The new HP driver may show the same device name description but is a more
recent version.
h. Scroll down and select "Return to driver summary."
i.
Scroll down and select Continue.
3.
The next driver summary screen displays storage and network devices.
4.
Scroll down to chose Modify and press Enter.
a.
Scroll down to highlight the "Network Boards" item and press Enter.
b.
The installation program displays the drivers detected. Delete the drivers
you wish to replace by selecting them and pressing the delete key.
c.
Insert the HP LAN driver disk (created with the Startup CD) in the floppy
drive.
d.
Press Insert to add a driver and then Insert again to add an unlisted driver.
e.
Press F3 and specify the path: A: then press Enter.
f.
The installation program takes a few seconds then automatically adds the HP
driver on the driver list.
g.
Scroll down and select "Return to driver summary."
h.
Scroll down and select Continue.
63