HP Tc2120 - Server - 256 MB RAM Installation Manual page 77

Graphical Interface Configuration:
In most cases, the installer will have automatically detected your video card
configuration by this step. Simply click Next to continue.
Monitor Configuration:
If the system is connected to a switch box, the installer most likely will not be able to
auto probe your monitor type. It is usually safe to just leave it with the default
settings of "Unprobed Monitor," or if it detects your monitor type, to leave it with
that. Click Next.
Customize Graphics Configuration:
If the installer was able to probe your video card successfully, it will most likely pick
a good resolution for your system based on the information gathered. If you are using
an older system with only 1Mb of video memory, you may want to select 256 Colors
at 1024x768, or 16-bit colors at 800x600. In most cases it will be safe to go with the
default.
You will probably want to click Test Setting before clicking Next, especially if you
have graphical selected. If testing the settings works, you may wish to boot in
graphical mode. If you do not want to be placed in graphical mode after boot, then
select Text. Click Next to continue.
Congratulations:
Your installation is complete. You have just installed Red Hat 8.0. You may now
click Exit to reboot the system (Be sure to remove the installation CD from the CD-
ROM drive).
NOTE: You will receive a "Red Hat Setup Agent" screen after rebooting the first time. Select
the correct date and time, then choose whether or not to register with the Red Hat Network
(Note: this is a subscription service). You can then choose to install additional packages. Click
Forward to continue.
Click Forward at the "Congratulations" screen. You will then be brought to the login
screen.
77