Selecting Image Quality - Canon D480 - ImageCLASS B/W Laser Basic Operation Manual

Selecting Image Quality

Selecting Image Quality

Selecting Image Quality
You can adjust the image quality of copies according to the types of documents. A correct
selection is necessary for the optimal reproduction of the colors of the document. These
settings return to the default values if the machine remains idle for a certain period of time
or if you press
The default settings is <TEXT/PHOTO>.
– Combinations of these four modes (TEXT/PHOTO, TEXT, PHOTO, TEXT/PHOTO+) cannot be selected at the same time. If
you select one of these modes, the previously set mode is canceled.
– If the document is a transparency, select the document type, then adjust the exposure to the most appropriate level for
the document.
Place documents.
1
For details, see "Placing Documents, " on p. 2-4.
Press
2
4-6
[Stop/Reset].
[COPY].
Press [Image Quality] repeatedly
3
to select the document type.
– <TEXT/PHOTO>: For documents that contain
text and photos
– <TEXT>: For text documents
– <PHOTO>: For documents that contain fi ne
text or photos
– <TEXT/PHOTO+>: For documents that
contain fi ne text and photos
Copy density automatically changes to the
manual mode when <TEXT/PHOTO>, <PHOTO>,
or <TEXT/PHOTO+> is set.