Changing Standard Mode - Canon D480 - ImageCLASS B/W Laser Basic Operation Manual

Changing Standard Mode

Changing Standard Mode

Changing Standard Mode
The Standard mode is the combination of copy modes that the machine automatically
applies when the power is turned ON, or when
the Standard mode to suit your needs.
The default settings are the followings:
– <IMAGE QUALITY>: TEXT/PHOTO
– <DENSITY>: MANUAL (5)
– <ZOOM RATIO>: 100%
– <AUTO COLLATE>: OFF
– <2-SIDED>: OFF
Press [Menu].
1
Press [ ] or [
2
SETTINGS>, then press [OK].
M E N U
4 C O P Y
Press [ ] or [
3
SETTINGS>, then press [OK].
C O P Y S E T T I N G S
1 S T A N D A R D
] to select <COPY
S E T T I N G S
] to select <STANDARD
S E T T I N G S
[Stop/Reset] is pressed. You can change
Press [ ] or [
4
setting item, then press [OK].
S T A N D A R D
1 I M A G E
You can specify the following settings:
– <IMAGE QUALITY>
– <DENSITY>
– <ZOOM RATIO>
– <AUTO COLLATE>
– <2-SIDED>
If you press [Stop/Reset] before pressing [OK],
the setting will not be registered.
Press [Stop/Reset] to return to the
5
standby mode.
Press [Menu] to return to the previous display.
] to select the desired
S E T T I N G S
Q U A L I T Y
4-21