Specifying Destinations; Specifying A New Fax Number - Canon D480 - ImageCLASS B/W Laser Basic Operation Manual

Specifying Destinations

Specifying Destinations

Specifying Destinations
This section describes how to specify a fax destination. You can select a destination stored
in a one-touch key or coded dial codes, or specify a new destination.

Specifying a New Fax Number

Specifying a New Fax Number

You can specify a new fax number using
[numeric keys] and
Place documents.
1
Press
2
Adjust any necessary scan settings for
3
your documents.
For details, see "Adjusting Density, " on p. 5-23,
and "Selecting Image Quality, " on p. 5-24.
5-18
– ,
[Tone].
[FAX].
Enter the fax number with
4
[numeric keys].
Ex.
= 0 3 1 X X X X X X
If you enter a wrong number when specifying a
fax number, press
Press [Start].
5
When you place the documents on the platen
glass, press [ ] or [
size, then press
When scanning is complete, press [OK] to start
sending.
If <CONFIRM FAX NO.> in <ACCESS TO DEST.> in
<SYSTEM SETTINGS> is set to <ON> and you
specify a fax number using
keys] and [Tone], you need to enter the fax
number again for comfi rmation, then press [OK].
–
[Stop/Reset].
] to select the document
[Start] for each document.
– , [numeric