Copy Settings; Adjusting The Density; Selecting Image Quality (Copy) - Canon imageCLASS MF4450 Basic Operation Manual

Copy Settings

Adjusting the Density

Copy mode screen
Copy: Press Start
100%
1
Density: 0
Original Type: Text
2-Sided: Off
Press [ ] or [
<Density>

Selecting Image Quality (Copy)

Copy mode screen
Copy: Press Start
100%
1
Density: 0
Original Type: Text/
2-Sided: Off
Press [ ] or [
Type>
<Text>
<Text/Photo (High Speed)>
<Text/Photo>
<Photo>
* If <Density> is set to <Auto Density>, <Density> will be changed to <Manual Density> when you select <Text/Photo (High Speed)>,
<Text/Photo>, <Photo>.
3-4
01
LTR
+ -
...
] to select
01
LTR
+ -
] to select <Original
This setting is suitable for documents that contain text without photos or illustrations.
This setting is suitable for documents that contain text and photos. This setting scans the document at a low
resolution.
This setting scans the document at a low resolution.
This setting is suitable for documents that contain text and photos.
This setting is suitable for the documents that contain photos printed in a magazine.
Setting screen
Density
Auto Density
Manual Density
- +
Press [ ] or [ ] to adjust the
density → [OK]
* Select <Auto Density> to copy with the density that is suitable for the
document. If other than <Text> is set as <Original Type>, <Original Type> will
be changed to <Text> when you select <Auto Density>.
* You can adjust <Manual Density> by pressing [
<Auto Density> or <Manual Density> is selected.
Setting screen
Original Type
Text
Text/Photo (High Spee
Text/Photo
Photo
Press [ ] or [ ] to select the appropriate settings
for the document → [OK]
Makes the copy density lighter.
[ ]
Makes the copy density darker.
[ ]
] or [ ], when either of