Basic Copying Method
Basic Copying Method
Basic Copying Method
This section describes the basic procedure for copying.
Place documents on the platen glass or
1
load them in the ADF.
–
For details, see "Placing Documents, " on p. 2-4.
–
Close the ADF/platen glass cover after placing
your documents.
–
For documents you can copy, see "Documents
Requirements, " on p. 2-2.
Press
2
–
If you want to adjust the image quality, see
"Selecting Image Quality, " on p. 4-6.
–
If you want to adjust the density, see
"Adjusting Density" on p. 4-8.
–
If you want to adjust the zoom ratio, see
"Enlarge/Reduce Images" on p. 4-10.
If you press and hold [OK] in the copy mode, a
sample page will be printed. For details, see
"Printing a Sample Page" on p. 4-22.
4-4
[COPY].
Use
–
[numeric keys] to enter the
3
desired copy quantity (1 to 99).
Ex.
1 0 0 %
T E X T / P H O T O
–
–
You cannot change the copy quantity while the
machine is copying.
Press
[Start].
4
L T R
1