Canon D480 - ImageCLASS B/W Laser Basic Operation Manual page 214

Message
LOAD CORRECT The size of the paper in the paper cassette
or multi-purpose tray is different from that
PAPER
of the paper specified in <PAPER SIZE> for
<CASSETTE> or <MP TRAY>.
LOAD PAPER –
–
LOST IMAGE The machine was turned OFF with
documents stored in the machine's memory.
Please note that any data stored in the
memory, including received fax documents,
will be deleted if you leave the machine
turned OFF for about 5 minutes.
MEMORY FULL –
–
NOT AVAILABLE –
–
NOT REGISTERED No recipient is registered for the one-touch
key or coded dial code you pressed.
OUT OF TONER The toner ran out completely.
CHANGE TONER
Description
No paper is loaded in the paper cassette
or multipurpose tray when copying or
printing.
No paper is loaded in the paper cassette
or multi-purpose tray when printing a
received document.
Or, when printing a report or list, this
message appears if the paper size is not
appropriate for printing a report or list
even if paper is loaded. This error message
appears with one of the messages below.
<CHANGE REG'D SIZE/ PAPER SETTINGS>
<CANNOT PRINT RX DATA>
The machine is full of jobs.
The number of TX/RX jobs that can be
stored in memory reached the Maximum.
You pressed the one-touch key that has
already been registered, when you are
registering group dialing.
You selected the group dialing that has
already been registered, when you are
registering a one-touch key.
Action
Load the correct size paper or change the
paper size in <PAPER SIZE> for <CASSETTE>
or <MP TRAY>. For details, see "If <LOAD
CORRECT PAPER> is displayed," on p. 11-18.
– Load paper correctly. Then press [OK] when
using the paper cassette.
– Load paper correctly. Then press [OK]
when using the paper cassette. For report
or list, set the paper size to <LTR>, <LGL>,
<A4>, <B5>, <OFICIO>, <BRAZIL- OFICIO>,
<MEXICO- OFICIO>, <GOVERNMENT-
LETTER>, <GOVERNMENT-LEGAL>, or
<FOOLSCAP>, and then load paper of the
same size.
The error is automatically released after two
seconds, and the machine automatically
prints out the lost report that shows the
records still existing in the activity report.
– Print, send, or delete any documents
stored in memory.
– Divide the document stack or data into a
few parts and try again one by one.
– Send the document with low resolution.
– The machine memory can store up to 256
fax jobs including sending and receiving
jobs. (Based on the condition that the other
party sends the fax by the imageCLASS
MF4370dn with ITU-T Standard Chart No.1,
standard mode.) Wait for the machine to
send any faxes in memory. Also print or
delete any documents in memory.
Register the one-touch key that is not used.
Register the recipients before using the
Address Book function.
Replace the toner cartridge.
Error Messages
11-15