Switching Temporarily To Tone Dialing - Canon D480 - ImageCLASS B/W Laser Basic Operation Manual

Sending Fax Documents
Place documents in the ADF.
2
Press
3
Adjust any necessary settings for your
4
documents.
For details, see "Adjusting Density, " on p. 5-23,
and "Selecting Image Quality, " on p. 5-24.
Press
5
handset of your external telephone.
If you press
adjust the monitor tone volume with [
[ ].
Dial the recipient's fax number.
6
Make sure to confi rm the dial tone before
entering a fax number. If you enter the number
before the dial tone is heard, the call may not
connect, or the wrong number may be dialed.
Talk through the handset to the recipient.
7
– If you press
pick up the handset when you hear the
recipient's voice.
– If you hear a high-pitched signal instead of
the recipient's voice, go to step 9.
Ask the recipient to set their fax machine
8
to receive faxes.
5-14
[FAX].
[Hook] or pick up the
[Hook], you can temporarily
[Hook] in step 5, you can
When you hear a high-pitched signal,
9
press
handset.
Scanning starts, and the scanned data is sent to
the specifi ed destination when scanning is
complete.
Switching Temporarily to Tone Switching Temporarily to Tone
Dialing Dialing
If your machine is set for pulse dialing, use the
procedure below to switch to tone dialing to use
information services (e.g., banks, airline
reservations, and hotel reservations).
To talk to the other party, you will need to connect an external
telephone to the machine.
Press
1
Press
2
] and
Make sure to confi rm the dial tone before
entering a fax number. If you enter the number
before the dial tone is heard, the call may not be
connected, or the wrong number may be dialed.
Enter the number of the fax information
3
service using
Ex.
= 0 3 1 X X X X X X
When the recorded message of the
4
information service answers, press
[Tone] to switch to tone dialing.
Ex.
= 0 3 1 X X X X X X T
[Start], then hang up the
[FAX].
[Hook].
– [numeric keys].