Send Start Speed - Canon D480 - ImageCLASS B/W Laser Basic Operation Manual

Send Start Speed

Send Start Speed

Send Start Speed
This function enables you to change the send start speeds, which is useful when there is
diffi culty initiating the sending of a document.
The default setting is <33600bps>.
Press [Menu].
1
Press [ ] or [
2
SETTINGS>, then press [OK].
M E N U
1 1 S Y S T E M
If the System Password has been set, enter the
System Password using
then press [OK].
Press [ ] or [
3
<COMMUNICATIONS>, then press [OK].
S Y S T E M S E T T I N G S
4 C O M M U N I C A T I O N S
Press [ ] or [
4
SPEED>, then press [OK].
C O M M U N I C A T I O N S
1 T X S T A R T
Press [ ] or [
5
start speed, then press [OK].
T X S T A R T
If your document transmission is slow in
starting, this may mean that the telephone lines
in your area are in poor condition. Select a
slower speed. You can select <33600bps>,
<14400bps>, <9600bps>, <7200bps>,
<4800bps>, or <2400bps>.
] to select <SYSTEM
S E T T I N G S
– [numeric keys],
] to select
] to select <TX START
S P E E D
] to select the desired
S P E E D
3 3 6 0 0 b p s
Press [Stop/Reset] to return to the
6
standby mode.
5-29