Setting The Incoming Ring - Canon D480 - ImageCLASS B/W Laser Basic Operation Manual

Setting the Incoming Ring

Setting the Incoming Ring

Setting the Incoming Ring
This function enables you to activate the ring alert of the external telephone if <RX MODE>
is set to <FaxOnly>. Selecting <ON> enables you to distinguish between the fax reception
and answer voice calls when you pick up the external telephone while it is ringing.
The default setting is <OFF>.
Press [Menu].
1
Press [ ] or [
2
SETTINGS>, then press [OK].
M E N U
5 F A X
Press [ ] or [
3
SETTINGS>, then press [OK].
F A X S E T T I N G S
4 R X
Press [ ] or [
4
RING>, then press [OK].
R X S E T T I N G S
1 I N C O M I N G
Press [ ] or [
5
<ON>.
I N C O M I N G
– <OFF>: Incoming tone does not ring. If you
select <OFF>, press [OK], then go to step 7.
– <ON>: Incoming tone rings. If you select
<ON>, press [OK], then go to the next step.
5-34
] to select <FAX
S E T T I N G S
] to select <RX
S E T T I N G S
] to select <INCOMING
R I N G
] to select <OFF> or
R I N G
O N
Press [ ] or [
6
ring times, then press [OK].
R I N G C O U N T
Press [Stop/Reset] to return to the
7
standby mode.
] to set the number of
2 T I M E S