Basic Copying Method - Canon imageCLASS D480 Basic Operation Manual

Basic Copying Method

Basic Copying Method

This section describes the basic procedure for copying.
1
Place documents on the platen glass or
load them in the ADF.
– For details, see "Placing Documents, " on p. 2-4.
– Close the ADF/platen glass cover after placing
your documents.
– For documents you can copy, see "Documents
Requirements, " on p. 2-2.
2
Press
– If you want to adjust the image quality, see
"Selecting Image Quality, " on p. 4-6.
– If you want to adjust the density, see
"Adjusting Density" on p. 4-8.
– If you want to adjust the zoom ratio, see
"Enlarge/Reduce Images" on p. 4-10.
If you press and hold [OK] in the copy mode, a
sample page will be printed. For details, see
"Printing a Sample Page" on p. 4-24.
4-4
[COPY].
3
Use – [numeric keys] to enter the
desired copy quantity (1 to 99).
Ex.
1 0 0 %
T E X T / P H O T O
The copy quantity appears on the right
–
side of the display.
If you make a mistake when entering
–
values, press [Clear] and enter the correct
values.
You cannot change the copy quantity while the
machine is copying.
4
Press [Start].
L T R
1