Changing the Forms Tear-Off Setting
Note: The default setting for Forms Tear‑Off is OFF.
To change the Forms Tear-Off setting:
Hold down the
1.
CHR PITCH
key.
SPEED
Press
repeatedly until the Rear Feed or
.
GROUP
Bottom Feed group shows in the first column of
the printed line, depending on which paper feed
you are using.
Press
repeatedly until Form Tear-Off appears
.
ITEM
in the second column:
Rear Feed
Form Tear‑Off
Press
until the time interval you wish to
.
SET
select appears in the third column:
Rear Feed
Form Tear‑Off
key and press the
PRINT
Manual
1 Sec
Hold down the
.
CHR PITCH
key to exit Menu Mode and save the
PRINT SPEED
setting.
Manual Forms Tear Off
If you don't wish to engage the Forms Tear-Off
feature, you can advance
rear-feed continuous forms loaded on the
built-in tractor
or
bottom-feed continuous forms loaded on the
optional push tractor
up to the tear off position manually by pressing the
key and then pressing
LF/FF
key and press the
.
TEAR
ML690/ML691 User's Guide