Oki ML690 User Manual page 47

MENU SETTINGS TABLE
Group Item
Rear Feed Form Tear-Off
(Push)
(cont.)
Skip Over Perforation
Page Width
displayed for ML691)
Function
5
Specify manual form paper
advancement or select a time;
when printer is idle for .5, 1 or
2 seconds, paper is advanced
from the current print position to
the tear position. When data is
received, paper is moved to its
original printing position.
Specify whether to skip over
perforations or not. When a skip-
over command is received, it is
given priority. If your software has
its own page formatting controls,
leave the default setting. To set
the printer to go to the next page
when it comes within 1" (25 mm)
of the bottom of the page, change
the setting.
4
(only Change to 8" to print on narrow
paper.
Settings (defaults are set in bold italic)
Manual, 0.5 sec, 1 sec, 2 sec
No, 25.4 mm (1")
13.6", 8"
ML690/ML691 User's Guide