Oki ML690 User Manual page 60

MENU SETTINGS TABLE
Group Item
Set-Up Reset Inhibit
(cont.)
Print Suppress Effective
Auto LF
Auto CR
for IBM Emulation)
SI Select Pitch (10 cpi)
(only displayed for IBM
Emulation)
SI Select Pitch (12 cpi)
(only displayed for IBM
Emulation)
Function
To prevent a reset signal from
the computer from resetting the
printer to its defaults, set to Yes.
Set whether to enable or disable a
print suppress setup command.
Set whether to perform automatic
line feed operation or not upon
receiving a CR code. If your
printout is consistently double-
spaced, select No; if it overprints,
select Yes.
7
(only displayed If you want the printer to
automatically add a carriage
return when a Line Feed is
received at the end of a line,
change the setting to "Yes."
7
Sets the pitch to be engaged when
the printer control panel is set
for 10 cpi and the SI command is
received.
7
Sets the pitch to be engaged when
the printer control panel is set
for 12 cpi and the SI command is
received.
Settings (defaults are set in bold italic)
No, Yes
No, Yes
No, Yes
No, Yes
15 cpi, 17.1 cpi
12 cpi, 20 cpi
ML690/ML691 User's Guide
0