Front Feed - Oki ML690 User Manual

Press and hold the
1.
the paper.
Note: The factory default setting for the Top of Form
(where the printing should begin) is 11/12" down
from the top of the page. To change the setting,
see "Top of Form (TOF)".

Front Feed

1 Lock Lever
2 Upper Tractor Cover
3 Pins
1
key to advance
LOAD/EJECT
2
3
Make sure the printer is turned ON.
1.
Make sure the Paper Type lever is in the FRONT
.
feed position.
Open the access cover (1) and set the Paper
.
Thickness lever to suit the paper. Close the cover.
Pull down the door to open the front sheet guide
.
(2).
1
2
ML690/ML691 User's Guide
1