Oki ML690 User Manual page 54

MENU SETTINGS TABLE
Group Item
Cut Sheet Page Width (only
Top Feed displayed for ML691)
Page Length
(cont.)
Initial Position
[Displayed when connected
to RPS]
Cut Position Adjust
[Displayed when connected
to RPS]
Wait Time
Paper Length Control
Function
Change to 8" to print on narrow
4
paper.
Specify the length of a cut sheet
page.
6
Paper position (print or cut) when
printer is powered on.
6
Specify an adjustment value for
where to cut the roll paper.
Specify the wait time from when
the paper is set on the tray to
when the printer feeds it.
Specify the page length of a cut
sheet.
Settings (defaults are set in bold italic)
13.6", 8"
3" (76.2 mm), 3.25" (82.6 mm),
3.33" (84.7 mm), 3.5" (88.9 mm),
3.66" (993.1 mm), 4" (101.6 mm),
5" (127 mm), 5.5" (139.7 mm), 6"
(152.4 mm), 7" (177.8 mm), 8"
(203.2 mm), 8.5" (215.9 mm), 11"
(279.4 mm), 11.7" (296.3 mm),
12" (304.8 mm), 14" (355.6 mm),
17" (431.8 mm)
Print position, Cut position
–30 ~ –1, 0, +1 ~ +30
Invalid, 0.5 sec, 1 sec, 1.5 sec, 2
sec, 3 sec
by Menu Setting, by Actual Page
Length
ML690/ML691 User's Guide