Loading Continuous Forms Paper - Oki ML690 User Manual

Loading Continuous Forms Paper

To avoid paper feeding problems:
Make sure the printer is on a surface

approximately 30" (76 cm) above the floor.
Position the continuous forms supply directly

below the printer, no more than 1.2" (3 cm) left
or right of the printer paper path.
Make sure the rear of the printer is close to and

parallel with the edge of the surface and at least
24" (61 cm) from any wall.
There are three ways to load continuous forms paper.
See the following pages for instructions.
Rear feed

Front feed

Bottom feed (optional pull tractor)

ML690/ML691 User's Guide
1