Oki ML690 User Manual page 49

MENU SETTINGS TABLE
Group Item
Rear Feed Continuous Paper Top of
(Push) Form
(cont.)
LF Revise (Continuous
Paper Line Feed Adjust)
Centering Position
Front Feed Line Spacing
(Push)
Form Tear-Off
Function
For continuous forms, sets a TOF
in small increments.
For continuous feed, adjusts the
line feed to the specified amount.
Used to limit printhead travel
when printing narrow columns.
Select Mode 1 for ML690. Select
Mode 1 or Mode 2 for the ML691.
Change to 8 lines per inch (lpi) to
get more lines on a page.
5
Specify manual form paper
advancement or select a time;
when printer is idle for .5, 1 or
2 seconds, paper is advanced
from the current print position to
the tear position. When data is
received, paper is moved to its
original printing position.
Settings (defaults are set in bold italic)
1/12" (2.12 mm), 2/12" (4.23 mm),
3/12" (6.35 mm), 4/12" (8.47 mm),
5/12" (10.58 mm), 6/12" (12.70
mm), 7/12" (14.82 mm), 8/12"
(16.93 mm), 9/12" (19.05 mm),
10/12" (21.17 mm), 11/12" (23.28
mm), 12/12" (25.40 mm), 13/12"
(27.52 mm), User Top of Form
–2, –1, 0, +1, +2
Default, Mode1, Mode2
6 LPI, 8 LPI
Manual, 0.5 sec, 1 sec, 2 sec
ML690/ML691 User's Guide