1
2
To advance the paper in small steps, press
.
NOTES:
> Make sure that the paper is accurately aligned
along the Paper Guide to avoid the possibility of
skewed printing or paper jams.
> When printing an envelope, do not open up the
flap.
> If you are feeding thick paper, push it in
sufficiently until it touches the feed roller to avoid
the possibility of skewed printing or paper jams.
Ejecting Cut Sheet Paper
When the printer reaches the end of the cut sheet
page it automatically ejects the page. If required,
add another sheet for the printer to continue printing
from where it left off.
To eject a cut sheet left in the printer, follow these
steps:
Press the
1.
Press
.
LOAD/EJECT
tray.
.
LF/FF
button to take the printer off-line.
SEL
to eject the paper to the paper
ML690/ML691 User's Guide