Changing The Forms Tear-Off Setting - Oki 320 User Manual

Changing the Forms Tear-Off Setting

The default setting for Forms Tear-Off is OFF.
1 2
SEL
LF
SEL
Micro Feed
SHIFT
MENU
Down
EXIT GROUP
POWER ALARM
To change the Forms Tear-Off setting:
1 Press SEL (1) + SHIFT (2).
2 Press GROUP (3) until one of the following lines appears,
depending on which paper feed you are using
REAR FEED Form Tear-Off
BOTTOM FEED Form Tear-Off
3 Press ITEM (4) until Form Tear-Off appears in the second
column.
4 Press SET (5) until the time interval you wish to select
appears in the third column.
5 Press SEL (1) + SHIFT (2) to exit Menu Mode and save the
setting.
32T-FP.eps
4
3
5
FF/LOAD TEAR PARK QUIET
Micro Feed
TOF
Up
PRINT
ITEM SET
MENU
OFF
OFF
!
The status of the Forms Tear-Off menu setting affects
how you set the Top of Form.
!
If the software package you are using "pauses" while
sending data to the printer, Forms Tear-Off may be
activated (if it is enabled through the Menu). The pause
must be for two seconds or more. No data is lost. Uneven
print registration will occur due to the paper movement.
If the problem occurs, use the menu to turn off Forms
Tear-Off.
!
DO NOT use Forms Tear-Off with labels or multi-part
forms!
!
Forms Tear-Off CANNOT be used when the optional
pull tractor is engaged.
|
User's Guide: English 47