Ejecting Cut Sheet Paper - Oki ML6300FB-SC User Manual

4. Adjust the Paper Thickness Lever (1) to suit the paper.
Thickness lever" on page 22.
NOTE
If the Paper Thickness Lever setting does not match the paper being used,
paper feeding and printing may not work properly.
5. With the printing side upwards insert the paper (1) on the Paper Tray (2) into the
printer until it is gripped.
If the skew correction mode is enabled, the printer will automatically correct any
skew. See "Skew correction and set free" on page 16.
NOTE
> When printing an envelope, do not fold up the flap. A flap aligned along
the Paper Guide can lead to skew printing.
> Load envelopes in landscape orientation only.
E
JECTING CUT SHEET PAPER
When the printer reaches the end of the cut sheet page it automatically ejects the page. If
required, add another sheet for the printer to continue printing from where it left off.
To eject a cut sheet left in the printer, carry out the following:
1. Press the SEL button to put the printer off-line.
2. Press the PARK button and the paper is ejected to the Paper Tray.
NOTE
Paper longer than A4 length (297 mm) may overlap and possibly fall off the
Paper Tray.
1
2
1
Paper handling > 18
See "Setting the Paper