Cut-Sheet Paper (Slip); Loading The Cut-Sheet Paper (Slip) - Oki OKIPOS 426S User Manual

1.. Cut-Sheet Paper (Slip)

1...1 Loading the Cut-Sheet Paper (Slip)

Use the paper that matches the specifications.
Note: The printer must be turned on before loading the paper.
1. Turn on the printer.
2. Insert the paper as shown below, while butting the right edge of the paper against the paper
guide.
3. Printer feed the paper until the top of form of the paper is reached.
Note: If cut sheet paper is set askew, remove the paper following the procedure below
and reset it:
1. Pull the lever (1) (marked PULL ).
2. Pull out the paper in the direction of the arrow.
3. Reset the paper.
1
1
|
User's Guide: English 19