Note
❒ Make sure that the paper size
and orientation in the display
panel correspond with the actu-
al paper size and orientation set
on the paper feed tray.
Changing the Paper Size of LCIT
A
Take the paper stack out of the in-
put tray.
B
Remove the paper remaining in
the intermediate feeding section.
Reference
p.170 "When Paper Misfeeds in
the LCIT"
C
Loosen the screw to unlock the
side guides.
D
Turn the side guide adjustment
knob to adjust the side guides to
the new paper size.
E
Tighten the screw to lock the side
guides.
F
Load paper.
ABQ033S
Note
❒ The leading edge of the paper
must touch the inside of the
LCIT.
AJK166S
Changing the Paper Size
ABQ041S
ABQ016S
4
173