Ricoh Priport DX 4640PD Operating Instructions Manual page 105

Separate per Original mode
Preparation
Before using this function, make
sure that the tape dispenser switch
is turned on.
A
Place first original on the exposure
glass or in the optional ARDF.
B
Press [Class Settings].
C
Press [Separate per Orig.].
D
Enter the number of prints per
original using the number keys,
and then press the {q} key.
Note
❒ Up to 30 originals can be set.
❒ If you use this setting frequently
you can register and recall a
program. For details, see p.92
"Registering a program" and
p.92 "Recalling a Program".
E
Press [OK] twice.
F
Press the {Start} key.
Separate Prints mode
Preparation
Before using this function, make
sure that the tape dispenser switch
is turned on.
A
Place one original on the expo-
sure glass or in the optional
ARDF.
B
Press [Class Settings].
C
Press [Separate Prints].
D
Enter print quantity per number
of class using the number keys,
and then press the {q} key.
Note
❒ Up to 30 classes can be set.
❒ If you use this setting frequently
you can register and recall a
program. See procedure of
"Registering a Program" and
"Recalling a Program" on p.92
"Class mode"
E
Press [OK] twice.
F
Press the{Start} key.
Printing Functions
3
93