Changing The Paper Size; Changing The Paper Size In Tray 2 And 3 - Ricoh Aficio MP 5500 Operating Instructions Manual

Adding Paper, Toner and Staples

Changing the Paper Size

This section explains how to change a paper size.
Procedures for changing the paper size differ depending on the tray (tray 1 or
other optional paper tray units). Make sure you are following the appropriate
procedure before you begin.
Note
❒ Be sure to select the paper size with User Tools. If you do not, misfeeds might
occur.
❒ Fan the paper before loading.
❒ Straighten curled or warped paper before loading.
❒ For details about paper sizes and types, see "Copy Paper", About This Ma-
chine.
5

Changing the Paper Size in Tray 2 and 3

The following procedure explains how to change a paper size in Tray 2 and 3.
Important
❒ If a paper tray is pushed vigorously when putting it back into place, the posi-
tion of the tray's side fence may slip out of place.
❒ Check the top of the paper is aligned to the right side.
❒ Do not stack paper over the limit mark.
A
Check that paper in the paper tray is not being used for copying, and then
pull the tray carefully out until it stops.
B
Remove paper if loaded.
72
ANS058S