If You Cannot Make Prints As You Want; Combine - Ricoh Priport DX 4640PD Operating Instructions Manual

Troubleshooting

If You Cannot Make Prints as You Want

Problem
Misfeeds occur frequently.
When you try to set several
functions at a time, you can-
not set some functions.
Parts of the image are not
printed in Erase border mode.
4
Prints are blank or parts of the
image are not printed.
2nd printing with another
drum is unsatisfactory.
An uneven solid image ap-
pears.
"Double feed detected at out-
put. Check the output." is dis-
played frequently.

Combine

Problem
Prints are blank or parts of the
image are not printed.
Print image is not correct.
148
Causes
Improper paper type is select-
ed.
Some functions cannot be
used together.
Erase margin is too wide.
Edge margins of original are
too narrow.
The paper feed side plates are
not set correctly.
The 1st print image is still wet. Wait until the 1st image be-
Large solid image wrinkles
the master.
The reverse or the face of
printed paper is printed again.
Causes
Original size and orientation
are not correct.
Original set order is not correct. Place originals face up in the
Solutions
Select proper paper type. See
p.52 "Printing onto Various
Kinds of Paper".
See p.138 "Combination
Chart".
Set a narrower erase margin
with User Tools. See p.100
"Erase Border".
Make sure that the paper feed
side plates touch the paper
lightly and the proper paper
size is displayed in the dis-
play.
comes dry.
Increase the print speed or se-
lect photo mode.
Set to "OFF" in "Double Feed
Warning" with User Tools.
Solutions
You cannot use originals of
different sizes and orientation
in Combine function. Use
originals of same size and ori-
entation.
optional ARDF. The first orig-
inal should be on top.
Place original face down on
the exposure glass. The first
original should be set first.