Ricoh Priport DX 4640PD Operating Instructions Manual page 205

❖ Back Margin: Left / Right
You can specify left and right mar-
gins on the back side of prints in
Margin Adjustment mode.
Note
❒ Default:
• Metric version: Right 5 mm
• Inch version: Right 0.2"
❖ Front Margin: Top / Bottom
You can specify top and bottom
margins on the front side of prints
in Margin Adjustment mode.
Note
❒ Default:
• Metric version: Top / Bottom 0 mm
• Inch version: Top / Bottom 0.0"
❖ Back Margin: Top / Bottom
You can specify top and bottom
margins on the back side of prints
in Margin Adjustment mode.
Note
❒ Default:
• Metric version: Top / Bottom 0 mm
• Inch version: Top / Bottom 0.0"
❖ 1 Sided→2 Sided Auto Margin: TtoT
In 1 sided → 2 sided duplex mode,
you can specify the margins on the
back side.
The margin is set to the same value
of "Back Margin: Left/Right".
Note
❒ Default:
• Metric version: Left / Right 0 mm
• Inch version: Left / Right 0"
Settings You Can Change with User Tools
❖ 1 Sided→2 Sided Auto Margin: TtoB
In 1 sided → 2 sided duplex mode,
you can specify the margins on the
back side. The value set for "Back
Margin: Top/Bottom" is used.
Note
❒ Default:
• Metric version: Top / Bottom 0 mm
• Inch version: Top / Bottom 0.0"
Others
❖ Ignore ADF Original Size
When you place long originals in
the optional ARDF, set original de-
tection to "Ignore". The machine
will not detect the original size.
Note
❒ Default: Do not Ignore
❖ Ignore Exposure Glass Original Size
When you place custom sizes orig-
inals on the exposure glass, set
original detection to "Ignore". The
machine will not detect the origi-
nal size.
Note
❒ Default: Do not Ignore
❖ Cancel Combine/Repeat Setting
Specifies whether Combine set-
tings is cleared after finishing your
print job.
Note
❒ Default: Do not Cancel
❖ Auto Separate (Class)
Specifies whether Separate mode
is automatically selected when you
make prints in Class Setting mode.
Note
❒ Default: On
5
193